JowettTalk

We are trying to reinstall the sunroof on the Jowett 10 it was sealed up and covered over years ago .Has anyone got any ideas as to the material that goes around the frame to stop the water leaking in .also what is used to make the sunroof well at the back . What is the profile of the seal that goes...

It's just a thought as most things have been covered , The pump has been overhauled,but has the throw of the pump been looked at ,is the arm ,the pump pushrod or the cam lobe that drives the pump worn reducing the throw . A few years ago I had problems with the car not going on anything over half th...

I am noticing that the Jowett 10 appears to be running a tad hot , temp gauge will read up to 90 deg C will then slowly drop to about 85deg .I have tested the water temp against the gauge reading and is good , cooling system and rad have been flushed and appear ok . Now the question I have is that u...

I had the skew gear wear on mine which gave me 40-50 deg of play at the rotor arm , all due to the oil jet on the pump being blocked

I am becoming aware that the Jowett 10s thermo syphon cooling system isn't quite up to today's heavy traffic and queues. The radiator is good and all the pipes and waterways are clear ,stuck in traffic the temp will rise up to 95 deg C . I am looking into the possibility of fitting an electric water...

What caused the push rods to bend and have they bent again since you tried to start the engine ?

I will still be attending,as keith says we have to live with this and try to have some normality,I shall restrict the number of passengers per trip and not overload , windows open and probably disinfect regularly.Also I am double vaccinated, I just need to be aware and careful

On the my early Javelin the wires come from under the centre of the dash and up inside the passenger windscreen pillar ,along the near side behind the headlining to the door pillar before going across to the light ,if I remember correctly the later model had a switch on the light ,where as the early...

Hi Keith ,yes this vehicle originally had side windows but no rear seats ,it started life doing bakery deliveries

Hi all ,when my Bradford utility details were transferred to the new style log book by the previous owner it has been recorded under body type as saloon ,does anyone know if this will give me problems if I decide to change to a custom built pick up

Hi Alexander
The gauge on my PA was very similar in operation but unfortunately ended up replacing it with a recon unit

Thanks Keith some very helpful pictures here

Hi all ,I have now found a box of brackets of which I think was removed from the wood frame ,unfortunately they are rusted and some need to be remade the ash frame has disintegrated and I only have a few bits here and there ,does anyone know of any diagrams that show where these brackets fit ,thanks...

Hi Paul welcome to Jowett motoring ,if you are not a member of Jowett Car Club that is the first thing you will need to do ,this will allow you access to Jowett Car Spares and a vast amount of members knowledge

I have found a dynamo in the back of dad's garage ,can anyone tell me if it is off of a CC Bradford It's a Lucas ,the markings are 22258D 5 54 C39PV2 LO 12v The pulley has a diameter of 3.5 in , It looks similar to a Javelin one but with a larger pulley Thanks for any help