JowettTalk

Hello everyone, It was such a nice time at the Jowett Rally. It was very helpfull for me for asked many questions there. Maybe we will write a letter for the Jowetter in a couple weeks. On Saturday I picked up my construction from the woodmaker. :D IMG_5362[1].PNG My progress on frame is also going....

Thanks, this week we want to book the plane to Manchester and the pension to sleep in near "Jowett Rally" Do you already have booked the pension?, If yes can you give me a internet-address? perhaps we can stay in he same pension. Kind reguards Marcel K. PS: Have I register me anywhere?,

Hello Jowett colleges, I think to come to Jowett Rally this year. My wonderful girlfriend will attend me. Do you think its okay if we come to Manchester airport and drive by taxi or bus to the Jowett rally? I hope there is a apartment small claim near Lyme Park, Stockport. Can you recommend me a goo...

Okay, Thank you.

I report, if there are news.




The car wings are back from paint stripping:
Here you can see:
#
#

okay,
Thank you Tony, also for drawing.

The drawing shows the function of change the bearings.

Thank you!
There are problems to get the bearings?

Kind Regards

Hello,
Thank you for giving information.
The axial is dry and good, I doesn´t want to decompose the axle.

Can anybody tell me, is it possible to replace the bearing without decompose the axial?

Kind Regards Marcel K.

Hello,
The Motor screws and Oilfilter are checked!

The next step is to change the ball bearings. In the picture you can see my attemp... the wheel boss isn´t going away from the axle Is that way right or wrong?

Kind Regards

Hello Tony, thank you for technical information.

again: I would clean the oil filter, I must take off the four screws (Picture No.6) , clean the filter and screw on.
Right?

Marcel.

Hello Jack,

Thank you for invitation. Next Year I resolve a trip to england.

Do you have more informations about ihr dutch rally?
Isn´t the Jowett rally next Year?

Marcel.

Please, can anybody help me wherefore all those screws are?

1:
2:
3:
4:
5:
6:
7:
8:


Thank you!, I think that do you know in sleep...

Kind Regards Marcel K.

Hello,

on weekend I degraded and cleaned a part from my Jowett engine, still the bottom side must be clean.

Here a few pictures for you:

Oh, thank you! I have looked in the garage and i found a compatible grease gun! I grease all nipples on front axle, to see, what bearing bushes I have to replace. all bushes from break leverage must be replace, all other bushes are ok. the next step was going to a specialist and bring engine and bot...

There is a lubrication nipple:
my grease press isn´t right for this nipple,
where can I get a suitable for this?

the Jowett in cabinetmakers repair shop:

Hello Jowett Colleagues,
here a few Pictures from the my Jowett:
this Picture show the transport