LUCAS VOLTAGE REGULATOR 12V AND A 6 V
-
- Posts: 58
- Joined: Sun May 07, 2006 10:43 am
- Your interest in the forum: JUPITER HDM 949, MG ZT 260 4.6 V8, ROVER B.R.M, 1935 WOLESLEY WASP, HARLEY DAVIDSON XR 1200,
- Location: Stockport
- Contact:
LUCAS VOLTAGE REGULATOR 12V AND A 6 V
Selling, Lucas Regulator box 9 pin 12 v £40, and a 6v Regulator box 9 pin £40. Greg 01614373916
my jupiter ,owner from 1965, HDM 949
-
- websitedesign
- Posts: 3820
- Joined: Wed Feb 08, 2006 11:22 am
- Your interest in the forum: Jup NKD 258, the most widely travelled , raced and rallied Jowett.
- Given Name: Keith
- Contact:
Re: LUCAS VOLTAGE REGULATOR 12V AND A 6 V
Now that is a coincidence. Jack had followed the wiring diagram in the handbook and incorrectly wired up the regulator as the handbook was 6v and the CC was 12 v thus using a different regulator. Although both 9 pin the terminal layout is completely different, only the dynamo wire stays in the same place
.
So after some thought and a new terminal map I rewired the offending regulator. Luckily we had not conected the dynamo when we started the engine a couple of days ago..

So after some thought and a new terminal map I rewired the offending regulator. Luckily we had not conected the dynamo when we started the engine a couple of days ago..
skype = keithaclements ;
Who is online
Users browsing this forum: No registered users and 25 guests