I would be very grateful for an advice on fitting the above (hopefully the image has attached?)
I had hoped that it would simply involve swapping the pulley over but as you can hopefully see the shafts are of different sizes!
Any thoughts?
BW
Harry
Dynamo to Dynalternator?
-
harrynaerger
- Posts: 23
- Joined: Wed Jun 05, 2019 9:02 am
- Your interest in the forum: I own a Jowett Jupiter which has been converted for historic racing.
- Given Name: Harry
- Contact:
Dynamo to Dynalternator?
Evening all.
I would be very grateful for an advice on fitting the above (hopefully the image has attached?)
I had hoped that it would simply involve swapping the pulley over but as you can hopefully see the shafts are of different sizes!
Any thoughts?
BW
Harry
I would be very grateful for an advice on fitting the above (hopefully the image has attached?)
I had hoped that it would simply involve swapping the pulley over but as you can hopefully see the shafts are of different sizes!
Any thoughts?
BW
Harry
-
Chris Spencer
- Posts: 1894
- Joined: Sat Oct 24, 2009 8:45 pm
- Your interest in the forum: Everything Jowett - Restoration Specialist
- Given Name: Chris
- Location: Hampshire. UK
- Contact:
Re: Dynamo to Dynalternator?
Harry - Let me see what size the one I have in the workshop is / brand etc & take some pics - back later with some info - Chris
27 Long 4 Tourer Oily Rag
37 Jowett 8 HP - In many parts
52 Javelin Std 'Taxi Livery'
52 Javelin Std Patina project
52 Javelin Std Sports project
52 Jupiter SA - Original car - full restoration project
54 Jupiter SA - project - shortly for sale
37 Jowett 8 HP - In many parts
52 Javelin Std 'Taxi Livery'
52 Javelin Std Patina project
52 Javelin Std Sports project
52 Jupiter SA - Original car - full restoration project
54 Jupiter SA - project - shortly for sale
-
harrynaerger
- Posts: 23
- Joined: Wed Jun 05, 2019 9:02 am
- Your interest in the forum: I own a Jowett Jupiter which has been converted for historic racing.
- Given Name: Harry
- Contact:
Re: Dynamo to Dynalternator?
Hi Chris
Very many thanks for getting back to me. I have been in touch with the manufacturers. The unit we were sent had a 15mm hub but we need a 17mm hub which they also stock so I will arrange to get them changed.
BW Harry
Very many thanks for getting back to me. I have been in touch with the manufacturers. The unit we were sent had a 15mm hub but we need a 17mm hub which they also stock so I will arrange to get them changed.
BW Harry
-
Forumadmin
- Site Admin
- Posts: 20389
- Joined: Tue Feb 07, 2006 5:18 pm
- Your interest in the forum: Not a lot!
- Given Name: Forum
- Contact:
Re: Dynamo to Dynalternator?
Yes Harry, I had no problem with the four that I have fitted. Perhaps you could post on here the supplier and part number that you used.
Who is online
Users browsing this forum: No registered users and 2 guests