10 hp parts.

Post by **Forumadmin** » Sun Jan 03, 2010 8:39 pm

Perhaps our members in France or any 10hp owners would like to respond to Gilles.

BONJOUR
IM FRANÃ‡AIS ET JE RECHERCHE DE PIECES POUR MOTEUR A 4 CYLINDRES SOUPAPE laterale.
Avez-vous des piÃ¨ces diffÃ©rentes pour ce moteur?
OU PUIS-je trouver des piÃ¨ces pour ce moteur?
BEST REGARDS
GILLES
g.d.t@orange.fr

Post by **Forumadmin** » Sun Jan 03, 2010 8:43 pm

S'il vous plaÃ®t voir l'affichage sur JowettTalk.
Vous aurez besoin d'Ãªtre membre du club d'acheter des piÃ¨ces de rechange du Club de voitures Jowett piÃ¨ces de rechange en stock. Toutefois, certains membres de mai Ãªtre en mesure d'aider.

Was my response translated by Google!

Alastair Gregg · Post by **Alastair Gregg** » Mon Jan 04, 2010 8:56 am

Google and Babel fish both do translations of various languages. I am putting the, very literal, translation of what Gilles and Forumadmin are talking about up for you. Should you wish to respond the translation pages are :

http://uk.babelfish.yahoo.com/translate_txt

http://translate.google.com/#

However here is what Gille said to Keith:-

HELLO IM FRENCH AND I SEARCH FOR PARTS FOR ENGINE have 4 CYLINDERS SIDE VALVE. Do you have different parts for this engine? OR can I find parts for this engine? BEST GLANCES GILLES

and what Keith said to Gilles:-

HELLO S' you like it to see l' posting on JowettTalk. You will need d' to be member of the club d' to buy spare parts of the Club of cars Jowett spare parts in stock. However, certain members of May being in d' measurement; to help.

Post by **Forumadmin** » Mon Jan 04, 2010 3:09 pm

Gilles has registered on JowettTalk so perhaps we will learn some more French. Please help him him out.

Gilles please say which parts you think you need.
Gilles s'il vous plaÃ®t quelles rÃ©gions vous pensez avoir besoin.

Alastair Gregg · Post by **Alastair Gregg** » Mon Jan 04, 2010 4:26 pm

I have asked a near native French (English)speaker to contact Gilles and hope he will.

PAUL BEAUMONT · Post by **PAUL BEAUMONT** » Thu Jan 07, 2010 2:32 pm

JCS has 2 engine sets of cylinders that I am getting tired of walking around!!

Alastair Gregg · Post by **Alastair Gregg** » Thu Jan 07, 2010 2:51 pm

Further to previous post, a JCC member who speaks French has e-mailed Gilles, and hopes to help him.

So am not sure if your suffering will be relieved yet Paul

vicboddy · Post by **vicboddy** » Fri Jan 08, 2010 10:23 am

Hello Folks

I have been able to talk to Gilles. He does not have a 10hp car....he has a BRISTOL tractor with a 4 cylinder side valve flat four engine, which he believes (and I do not know) is the same engine as fitted in the 10hp car.

The tractor engine is missing the valves, distributer, timing chain, flywheel, starter motor (if there was one, he has a crankhandle).

Can anybody elucidate? Personally I have heard of twin cylinder Bristol tractors, not 4 cylinder, but it is not an area I know much about. Who in the club can I contact to try to help Gilles? If such a thing is available, he would be happy to buy a complete engine, rather than just the parts.

Regards Vic

Post by **Forumadmin** » Fri Jan 08, 2010 11:34 am

John Stockwell is the resident guru. Contact deatils on front page of each Jowetteer!
Peter Holden has also contacted me about it.

PAUL BEAUMONT · Post by **PAUL BEAUMONT** » Fri Jan 08, 2010 2:12 pm

Hi Vic, there are a fair number of Bristols with 4 cylinder Jowett engines. I suspect that they were fitted with a mag rather than a distributor and I wonder if that is where the initial problem lay as it would have been driven from the timing case much like the pre-war dynamo. If it is the same as the 2 cylinder stationary engine, it was probably a Wico mag.
There is an enthusiastic Bristol tractor club - they advertise regularly on British Ebay.
JCS probably has valves, STILL has cylinders and can probably supply ot source a timing chain. My guess is that the Mag could be a challenge, but I reckon that Tractor folk may be more helpful than we can be!!

Alastair Gregg · Post by **Alastair Gregg** » Fri Jan 08, 2010 2:17 pm

This link just might help.

http://home.hccnet.nl/m.hooijberg/bristol.html

gilles83 · Post by **gilles83** » Mon Jan 11, 2010 7:00 pm

Hello an tahnks a lot for you information
the engine number is J91401
It S 4 cylinders lateral valve

i try to post a photo for you see the modele of the engine

I search technical, parts book to see the missing parts

i m sure i'm missing flywheel, carburator, valve, ignition( magneto) and another parts...

i try to post photo but i can't...
have you have an idea??

THANKS A LOT for you informations

best regards
GILLLES

gilles83 · Post by **gilles83** » Wed Jan 13, 2010 12:32 pm

bonjour

Je crois que Je leur ai envoyÃ© une photo avec succed! Parce que j'essaie Une semaine pendentif!

alors Pouvez vous de voir ce que le moteur.
Frew piÃ¨ces manquantes sont: Le whell Mouche, soupapes, allumage (Magneto) du carburateur

Qu'est-ce que quelqu'un connais le modÃ¨le de carburateur, magnÃ©to Ã©lectrique Ã©quipÃ©e de ce moteur?
Le carburateur est-elle la mÃªme que 2 cylindres?

BEST REGARDS
GILLES

Alastair Gregg · Post by **Alastair Gregg** » Wed Jan 13, 2010 12:51 pm

A Translation:-

hello I believe that I sent a photograph with succed to them! Because j' test One week pendentive! then Can you see what the engine. Frew missing parts are: The whell Fly, valves, lighting (Magneto) of the carburettor Qu' quelqu' do one know the model of carburettor, electric magneto been driven by this engine? Is the carburettor the same one as 2 cylinders?

Bryan Walker · Post by **Bryan Walker** » Wed Jan 13, 2010 6:32 pm

should be able to use the CA/CB bradford flywheel on the 10hp

JowettTalk

10 hp parts.

10 hp parts.

For our Non French speakers

New member and language

Contact has been offered

Bristol Tractor

A Translation

Who is online